HP storageworks 2/32, Installation Manual

Page: 49 / 138

Installing and Configuring the Edge Switch 2/32
49 Edge Switch 2/32 Installation Guide
Set Switch Date and Time
The Edge Switch 2/32 Product Manager log entries are stamped with the date and
time received from the switch. To set the effective date and time for the switch:
1. At the Hardware View page for the selected switch, choose Configure >
Date/Time . The Configure Date and Time dialog box displays ( Figure 14 ).
The switch date and time can be set manually, or set to be periodically
updated by the
HAFM application (the switch and HAFM application
synchronize at least once daily).
Figure 14: Configure Date and Time dialog box
Set Date and Time Manually
To set the switch date and time manually:
1. At the Configure Date and Time dialog box, click Periodic Date/Time
Synchronization to deselect the option (no check mark in the box). The
greyed out Date and Time fields activate.
2. Click the Date fields that require change, and type numbers in the following
ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YY): greater than 1980
3. Click the Time fields that require change, and type numbers in the following
ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
4. Click Activate to set the switch date and time and close the Configure Date
and Time dialog box.