Using the Embedded Web Server
92
Edge Switch 2/32 Installation Guide
2. Click
Activate
to save the information. The message
Your changes to
the identification configuration have been
successfully activated
displays.
Configure Date and Time
Perform this procedure to configure the effective date and time for the switch. To
set the date and time:
1. At the
Configure
window, click the
Switch
tab, then select
Date/Time
tab.
The Switch page displays with
Date/Time
tab selected (highlighted red)
(
).
Figure 38: Switch page—Date/Time tab
a.
Click the
Date
fields that require change, and type numbers in the
following ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YY): greater than 1980
b.
Click the
Time
fields that require change, and type numbers in the
following ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
Summary of Contents for storageworks 2/32
