HP storageworks 2/32, Installation Manual

Page: 73 / 138

Installing and Configuring the Edge Switch 2/32
73 Edge Switch 2/32 Installation Guide
3. Enter a name from one to 64 characters in length. All characters in the ISO
Latin-1 character set, excluding control characters, are allowed.
4. Choose one of the following from the drop-down list under the Name field:
■
Rx Throughput —An alert will occur if the threshold set for receive
throughput is reached
■ Tx Throughput —An alert will occur if the threshold set for transmit
throughput is reached.
■
Rx or Tx Throughput —An alert will occur if the threshold set for either
receive or transmit throughput is reached.
5. Click Next . A new screen displays with additional parameters, as shown in
Figure 26 . The name configured for the alert displays at the top of the screen.
Note: Click Previous if you need to return to the previous screen.
Figure 26: New Threshold Alerts dialog box
—
second screen
6. Enter a percentage from 1 through 100 for % utilization. When throughput
reaches this percentage of port capacity, a threshold alert will occur.