HP storageworks 2/32, Installation Manual

Page: 77 / 138

Installing and Configuring the Edge Switch 2/32
77 Edge Switch 2/32 Installation Guide
Delete Alerts
Use the following steps to delete existing threshold alerts:
1. At the Hardware View page, choose Configure > Threshold Alerts . The
Configure Threshold Alerts dialog box displays.
2. Select the alert that you want to delete by selecting the alert information in the
table and click Delete . A message displays asking you to confirm the deletion.
3. Click Yes . The alert is removed from the dialog box.
Test Remote Notification
If the call-home and e-mail notification features are enabled, set up the HAFM
application to test these remote notification features. Because the features are
configured at the
HAFM application, call-home and e-mail notification are
enabled for multiple switches or HP managed products. To test remote
notification:
1. Close the Hardware View page for the switch and return to the Product
View page by closing the window.
2. At the Product View page, choose Maintenance > Test Remote
Notification . The Test Remote Notification dialog box displays ( Figure 30 ).
Figure 30: Test Remote Notification dialog box
3. Choose Call Home and E-Mail to perform applicable tests.
The call home test provides a test notification message to a remote support
center. Depending on the option chosen during HAFM installation, the test
notification message is transmitted over telephone lines or LAN.
4. Click Send Test . Call-home and e-mail test messages are transmitted and an
Information dialog box displays ( Figure 31 ). Click OK to close the dialog
box.