HP storageworks 2/32, Installation Manual

Page: 74 / 138

Installing and Configuring the Edge Switch 2/32
74 Edge Switch 2/32 Installation Guide
7. Enter the amount of cumulative minutes in which the % utilization should
exist during the notification interval before an alert is generated. You can also
choose
At any time if you want an alert to occur whenever the set %
utilization is reached. The valid range is from 1 to the interval value set in
step 8 .
8. Enter the interval in minutes in which throughput is measured and threshold
notifications can occur. The valid range is 5 minutes to 70,560 minutes.
9. Click Next . A new screen displays for selecting ports for the alerts, as shown
in Figure 27 .
Figure 27: New Threshold Alerts dialog box
—
third screen
10. Choose either Port Type or Port List .
■ For Port Type , choose either E_Ports or F_Ports to cause this alert to
generate for all ports configured as E_Ports or F_Ports respectively.
■ For Port List , you can choose individual ports by clicking the check box
by each port number or set all ports. Selecting Set All Ports places a
check mark by each port number. Selecting Clear All Ports clears the
check marks by each port number.