Hardware options installation 61
6.
Install the PCI fan and connect the fan power cable.
7.
Install the system air baffle (on page
24
).
8.
Install the PCI air baffle (on page
22
).
9.
Install the access panel (on page
19
).
10.
Return the server to an upright position.
11.
Connect each power cord to the server.
12.
Connect each power cord to the power source.
13.
Power up the server (on page
18
).
System fan upgrade option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (
http://www.hp.com/go/qs
).
To install the component:
1.
Power down the server (on page
18
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Place the server on its side.
4.
Remove the access panel (on page
18
).
5.
If installed, remove the PCI air baffle (on page
22
).
6.
Remove the system air baffle (on page
23
).
Summary of Contents for ProLiant ML110 Gen9
