Hardware options installation 39
14.
Install the 8-bay SFF hot-plug drive cage assembly in box 2.
15.
If two 8-bay SFF hot-plug drive cages are installed, install the storage controller ("
Installing the storage
controller and FBWC module options
" on page
49
).
16.
Connect the drive cage cables. See 8-bay SFF hot-plug drive cabling (on page
88
). Then, install the
drives.
17.
Install the system air baffle (on page
24
).
18.
If removed, install the PCI air baffle ("
Install the PCI air baffle
" on page
22
).
19.
Install the front bezel (on page
21
).
20.
Install the access panel (on page
19
).
21.
Return the server to an upright position.
22.
Connect each power cord to the server.
23.
Connect each power cord to the power source.
24.
Power up the server (on page
18
).
Drive options
For a list of drive configurations supported in this server, see "Drive numbering (on page
14
)."
The embedded storage controller supports SATA drive installation. For SAS drive installation, install an HP
Host Bus Adapter or an HP Smart Array Controller board option.
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (
http://www.hp.com/go/qs
).
Drive installation guidelines
When adding drives to the server, observe the following general guidelines:
•
The system automatically sets all device numbers.
•
Populate drive bays, based on the drive numbering sequence. Start from the drive bay with the lowest
device number ("
Drive numbering
" on page
14
).
Summary of Contents for ProLiant ML110 Gen9
