Hardware options installation 83
Retaining the recovery key/password
The recovery key/password is generated during BitLocker setup, and can be saved and printed after
BitLocker is enabled. When using BitLocker, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker detects a possible compromise of system
integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery
key/password:
•
Always store the recovery key/password in multiple locations.
•
Always store copies of the recovery key/password away from the server.
•
Do not save the recovery key/password on the encrypted hard drive.
Enabling the Trusted Platform Module
1.
During the server startup sequence, press the
F9
key to access System Utilities.
2.
From the System Utilities screen, select
System Configuration
>
BIOS/Platform Configuration (RBSU)
>
Server Security
.
3.
Select
Trusted Platform Module Options
and press the
Enter
key
.
4.
Select
Enabled
to enable the TPM and BIOS secure startup. The TPM is fully functional in this mode.
5.
Press the
F10
key to save your selection.
6.
When prompted to save the change in System Utilities, press the
Y
key.
7.
Press the
ESC
key to exit System Utilities. Then, press the
Enter
key when prompted to reboot the server.
The server then reboots a second time without user input. During this reboot, the TPM setting becomes
effective.
You can now enable TPM functionality in the OS, such as Microsoft Windows BitLocker or measured boot.
CAUTION:
When a TPM is installed and enabled on the server, data access is locked if you fail
to follow the proper procedures for updating the system or option firmware, replacing the system
board, replacing a hard drive, or modifying OS application TPM settings.
For more information on firmware updates and hardware procedures, see the
HP Trusted Platform Module
Best Practices White Paper
on the HP website (
http://www.hp.com/support
).
For more information on adjusting TPM usage in BitLocker, see the Microsoft website
(
http://technet.microsoft.com/en-us/library/cc732774.aspx
).
Summary of Contents for ProLiant ML110 Gen9
