Hardware options installation 42
13.
Connect all the drive cables.
14.
Install the system air baffle (on page
24
).
15.
If removed, install the PCI air baffle ("
Install the PCI air baffle
" on page
22
).
16.
Install the front bezel (on page
21
).
17.
Install the access panel (on page
19
).
18.
Return the server to an upright position.
19.
Connect each power cord to the server.
20.
Connect each power cord to the power source.
21.
Power up the server (on page
18
).
Installing a hot-plug drive
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1.
Remove the drive blank.
Summary of Contents for ProLiant ML110 Gen9
