HP ProLiant DL370 User Manual Download Page 64

Page: 64 / 153

Hardware options installation 64

The cabling for drive cage bay 1 is not shown for clarity.

Connect the SAS cables to an optional SAS controller ("

Storage controller option

" on page

) or to

an optional SAS expander.

10.

Route and connect the SAS cables.

11.

Install the fan cage.

12.

Install the air baffle.

13.

Install the access panel.

14.

Do one of the following:

Close or install the tower bezel, as needed.

Slide the server back into the rack.

CAUTION:

To prevent improper cooling and thermal damage, do not operate the server unless

all bays are populated with either a component or a blank.

15.

Install the hard drives and hard drive blanks.

Summary of Contents for ProLiant DL370


























































































































































Search results

Summary of Contents for ProLiant DL370

Reviews:

Related manuals for ProLiant DL370

Brands by name

Popular brands

HP ProLiant DL370, User Manual

Search results

Summary of Contents for ProLiant DL370

Reviews:

Related manuals for ProLiant DL370

Brands by name

Popular brands