HP ProLiant DL370 User Manual Download Page 24

Page: 24 / 153

Operations 24

The middle panel can be removed to access the Systems Insight Display and I/O bezel.

The top panel can be removed to access the removable media bays.

Extend the server from the rack

IMPORTANT:

If the server is installed in a telco rack, remove the server from the rack to access

internal components.

Extend the server on the rack rails until the server rail-release latches engage.

WARNING:

To reduce the risk of personal injury or equipment damage, be sure that the rack

is adequately stabilized before extending a component from the rack.

WARNING:

To reduce the risk of personal injury, be careful when pressing the server rail-

release latches and sliding the server into the rack. The sliding rails could pinch your fingers.

Summary of Contents for ProLiant DL370


























































































































































Search results

Summary of Contents for ProLiant DL370

Reviews:

Related manuals for ProLiant DL370

Brands by name

Popular brands

HP ProLiant DL370, User Manual

Search results

Summary of Contents for ProLiant DL370

Reviews:

Related manuals for ProLiant DL370

Brands by name

Popular brands