Hardware options installation 70
Installing a full-height media device
1.
Power down the server (on page
22
).
2.
Do one of the following:
o
Open or remove the tower bezel, as needed ("
Open or remove the tower bezel
" on page
22
).
o
Extend the server from the rack (on page
24
).
3.
Remove the access panel (on page
25
).
4.
Remove the air baffle (on page
26
).
5.
Remove the fan cage (on page
26
).
6.
Remove the media bay blank (on page
27
).
7.
Remove the DVD-ROM drive (on page
28
).
8.
Using a T-15 Torx screwdriver, remove the screws from the blank and install them on the device.
9.
Slide the media device part of the way into the bay.
Summary of Contents for ProLiant DL370
