Hardware options installation 101
b.
Push down the release tab, rotate it 180° clockwise, and then press it flat on the FlexibleLOM riser
cage.
9.
Connect the FlexibleLOM sideband signal cable.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all PCI slots have either an expansion slot cover or an expansion board installed.
10.
Install the access panel (on page
26
).
11.
Do one of the following:
o
Slide the server into the rack.
o
Install the server into the rack ("
Installing the server into the rack
" on page
36
).
12.
Connect the LAN segment cables.
13.
Power up the server (on page
20
).
