Hardware options installation 67
•
When installing two controller boards, install the controller boards in slots 2 and 3 of the 3-slot PCI riser
cage assembly installed in the primary PCIe riser location ("
PCI riser cage assembly options
" on page
93
).
Installing the storage controller and FBWC module options
To install the component:
1.
Power down the server (on page
20
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
20
).
o
Remove the server from the rack (on page
22
).
4.
Remove the access panel (on page
24
).
5.
Remove the PCI riser cage ("
Remove the PCI riser cages
" on page
26
).
6.
If you intend to use an FBWC module, install the module on the storage controller. Depending on the
controller model, the cable connector on the cache module might be facing up or down when the
module is installed on the controller board.
