Hardware options installation 60
3.
Do one of the following:
o
Extend the server from the rack (on page
20
).
o
Remove the server from the rack (on page
22
).
4.
Remove the access panel (on page
24
).
5.
Remove the primary PCI riser cage ("
Remove the PCI riser cages
" on page
26
).
6.
If the 8-bay LFF hot-plug drive cage is currently connected to an HBA, remove the HBA from the primary
PCI riser cage.
7.
If the 8-bay LFF hot-plug drive cage is currently connected to the Mini-SAS connectors on the system
board, do the following:
a.
Disconnect the existing Mini-SAS cables from the drive backplane and the Mini-SAS connectors on
the system board.
b.
Release the Mini-SAS cables from the right front chassis cable clip.
8.
Install the storage controller:
