Setup 38
d.
Position the power cord inside the clip, and then close the clip.
e.
Slide the clip forward until it is flush against the edge of the power cord plug.
4.
For a server using a hot-plug power supply:
To prevent accidental power cord disconnection when
sliding the server in and out of the rack, secure the power cord in the hook-and-loop strap attached to
the power input module handle:
a.
Unwrap the hook-and-loop strap from the power input module handle.
CAUTION:
Avoid tight bend radii to prevent damaging the internal wires of a power cord or a
server cable. Never bend power cords and server cables tight enough to cause a crease in the
sheathing.