Hardware options installation 62
a.
Connect the common end of the Mini-SAS Y-cable to the controller option.
b.
Install the primary PCI riser cage ("
Install the PCI riser cages
" on page
28
).
c.
Route the Mini-SAS Y-cable along the side of the system board towards the front chassis, and then
connect the cable to the drive backplane.
d.
Secure the Mini-SAS Y-cable in the right front chassis cable clip.
10.
Install the access panel (on page
26
).
11.
Do one of the following:
o
Slide the server into the rack.
o
Install the server into the rack ("
Installing the server into the rack
" on page
36
).
12.
Power up the server (on page
20
).
13.
If you are planning to install new drives, install them now ("
Drive options
" on page
43
).
