Hardware options installation 100
o
Remove the server from the rack (on page
22
).
4.
Remove the access panel (on page
24
).
5.
Remove the air baffle (on page
29
).
6.
Remove the primary PCI riser cage ("
Remove the PCI riser cages
" on page
26
).
7.
If you already have an HP FlexibleLOM Adapter on hand, install the option in the FlexibleLOM riser
cage:
a.
Remove the cover opposite the FlexibleLOM riser slot.
b.
Install the FlexibleLOM adapter.
8.
Install the FlexibleLOM riser cage:
a.
Align the riser board with the corresponding connector on the system board, and then press down
the FlexibleLOM riser cage.
