Hardware options installation 111
6.
Install the TPM board. Press down on the connector to seat the board ("
System board components
" on
page
14
).
7.
Install the TPM security rivet by pressing the rivet firmly into the system board.
8.
If removed, install the expansion board.
9.
Install the access panel (on page
26
).
10.
Do one of the following:
o
Slide the server into the rack.
o
Install the server into the rack ("
Installing the server into the rack
" on page
36
).
11.
Power up the server (on page
20
).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker setup, and can be saved and printed after
BitLocker is enabled. When using BitLocker, always retain the recovery key/password. The recovery
