SROS Command Line Interface Reference Guide
Modem Interface Configuration Command Set
5991-2114
© Copyright 2006 Hewlett-Packard Development Company, L.P.
695
caller-id override [always
<number>
| if-no-cid
<number>
]
Use the
caller-id override
command to configure the unit to replace caller ID information with a
user-specified number. Use the
no
form of this command to disable any caller ID overrides.
Syntax Description
always
<number>
Always forces replacement of the incoming caller ID number with the number
given.
if-no-cid
<number>
Replaces the incoming caller ID number with the number given only if there is no
caller ID information available for the incoming call.
Default Values
By default, this command is disabled.
Functional Notes
This command forces a replacement of the incoming caller ID number with the number given. The received
caller ID, if any, is discarded, and the given override number is used to connect the incoming call to a
circuit of the same number.
Usage Examples
The following example configures the unit to always provide the given number as the caller ID number:
ProCurve(config)#
interface modem 1/2
ProCurve(config-modem 1/2)#
caller-id override always 5555555