SROS Command Line Interface Reference Guide
IKE Policy Command Set
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
1262
client authentication host
Use the
client authentication host
command to enable the unit to act as an Xauth host when this IKE
policy is negotiated with a peer.
Variations of this command include the following:
client authentication host username
<username>
client authentication host username
<username>
password
<word>
client authentication host username
<username>
password
<word>
passphrase
<phrase>
Syntax Description
username
<username>
Enter the value sent via Xauth as the username.
password
<word>
Enter the value sent via Xauth as the password.
passphrase
<phrase>
Optional. Enter the value sent via Xauth as the passphrase. This is only used with
authentication type OTP (one time password).
Default Values
By default, if this command is not present in the IKE policy the unit does not act as an Xauth host.
Functional Notes
The specified credentials are programmed into the unit and there is no prompt for entering values real-time.
Therefore, schemes requiring real-time input or additional responses (e.g., SecureID) are not supported. The
client authentication host
command and the
client authentication server
commands are mutually exclusive.
client authentication server list <listname>
on page 1264 for more information.
Usage Examples
The following example specifies the login credentials to be sent:
ProCurve(config-ike)#
client authentication host username jsmith password password1 passphrase
phrase
