SROS Command Line Interface Reference Guide
DHCP Pool Command Set
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
1410
client-name
<name>
Use the
client-name
command to specify the name of a Dynamic Host Configuration Protocol (DHCP)
client. Use the
no
form of this command to remove the configured client name.
Syntax Description
<name>
Identifies the DHCP client (example is
client1
) with an alphanumeric string (up to
32 characters in length).
Default Values
By default, there are no specified client names.
Usage Examples
The following example specifies a client name of
myclient
:
ProCurve(config)#
ip dhcp-server pool MyPool
ProCurve(config-dhcp)#
client-name myclient
Note
The specified client name should not contain the domain name.