manualshive.com logo in svg

HP ProCurve Secure 7102dl, Reference Manual, Page: 1212 / 1455

Share
Download
HP ProCurve Secure 7102dl Reference Manual Download Page 1212

SROS Command Line Interface Reference Guide

ISDN Group Config Command Set

5991-2114

© Copyright 2007 Hewlett-Packard Development Company, L.P.

1210

min-channels 

<1-255> 

Use the 

min-channels 

command to specify the minimum number of channels allocated for the ISDN 

group. Use the 

no

 form of this command to return to the default value.

Syntax Description

<1-255>

Specifies the minimum number of channels allocated for the ISDN group. Valid 
range is from 1 to 255.

Default Values

By default, the minimum number of channels is set to 0. When 

min-channels

 is set to 0, no channels are 

reserved for this group. This group can use available channels, but does not have any channels 
specifically reserved. Use the 

no min-channels

 command to return to the default value.

Usage Examples

The following example sets the minimum number of channels for ISDN group 

1

 to 

2

:

ProCurve(config)#

isdn-group 1

ProCurve(config-isdn-group 1)#

min-channels 2

Summary of Contents for ProCurve Secure 7102dl
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments