HP ProCurve MSM317 Reference Manual Download Page 90

Page: 90 / 124

CLI commands

Virtual AP context

2-60

Virtual AP context

Path:

View > Enable > Config > Virtual AP

Use this context to configure VSC profiles (formerly called VAPs).

By default, one VSC profile exists with the name "HP". This is the default profile and cannot be
deleted.

virtual ap name

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

virtual ap name

<name>

Change the VAP (VSC) name.

ingress interface

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

ingress interface (wireless | wireless)

<name>

Sets the specified interface as the ingress interface traffic will be accepted on.

no ingress interface (wireless | wireless)

<name>

Removes the specified interface as an ingress interface.

guest-mode

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

guest-mode

Enables broadcast of the wireless network name (SSID).

no guest-mode

Disables broadcast of the wireless network name (SSID).

max-association

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

max-association

<stations>

Sets the maximum number of clients stations that can associate with this VAP (VSC).

<stations>

Number of client stations. Range: 1 - 255.

ssid name

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

ssid name

<name>

Specifies the WLAN name (SSID) for the profile.

Summary of Contents for ProCurve MSM317





























































































































Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands

HP ProCurve MSM317, Reference Manual

Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands