CLI commands
WAN IP interface context
2-51
WAN IP interface context
Path:
View > Enable > Config > WAN IP interface
Use this context to configure various IP-networking related settings on the Internet port.
pppoe client user
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
pppoe client user
<username>
<password>
Sets the PPPoE username and password.
no pppoe client user
Deletes the PPPoE username.
Parameters
<username>
The username assigned to you by your ISP. The AP will use this username
to log on to your ISP when establishing a PPPoE connection.
<password>
The password assigned to you by your ISP. The AP will use this username
to log on to your ISP when establishing a PPPoE connection.
ip address mode
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
ip address mode (dhcp | pppoe | static)
Sets the IP addressing mode for Port 2.
Parameters
dhcp
Dynamic host configuration protocol. The DHCP server will automatically
assign an address to the AP, which functions as a DHCP client.
pppoe
Point-to-point protocol over Ethernet. The PPPoE server will automatically
assign an IP address to the AP. You need to supply a username and
password so the AP can log on.
static
This option enables you to manually assign an IP address to the AP.
ip address
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
ip address
<ip address>
/
<mask>
Sets a static IP address for the port.
Parameters
<address>
IP address.
</mask>
Subnet mask in CIDR format. Specifies the number of bits in the mask.
ip default-gateway
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
ip default-gateway
<ip address>
Sets the IP address of the default gateway.
Summary of Contents for ProCurve MSM317
