HP ProCurve MSM317, Reference Manual

Page: 96 / 124

CLI commands
Virtual AP context
2-66
Description
This feature enables you to control access to the AP based on the MAC address of client stations.
You can either block access or allow access, depending on your requirements. When both this
option and the MAC-based authentication options are enabled, the following applies: if a user’s
MAC address does not appear in the MAC filtering list, then MAC-based authentication takes place
for that user.
mac-filters mode
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
mac-filters mode (allow | block)
Either allow or block access to the wireless network for client stations whose addresses appear in
the MAC filter list.
mac authentication accounting
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
mac authentication accounting
Enables RADIUS accounting for this VAP (VSC).
no mac authentication accounting
Disables RADIUS accounting for this VAP (VSC).
mac authentication accounting radius profile
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
mac authentication accounting radius profile <name>
Sets RADIUS accounting to use the specified RADIUS profile.
no mac authentication accounting radius profile
Disables accounting support for MAC authentication.
mac authentication radius profile
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
mac authentication radius profile <radiusname>
Specifies the name of the RADIUS profile to use for MAC-based authentication.
no mac authentication radius profile
Do not use a RADIUS profile.
mac authentication radius stationid case
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
mac authentication radius stationid case (uppercase | lowercase)
Specifies the case applied to the station delimiter if it is a letter.