HP ProCurve MSM317 Reference Manual Download Page 73

Page: 73 / 124

CLI commands

Config context

2-43

dynamic key interval

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

dynamic key interval (5m | 10m | 15m | 30m | 1h | 2h | 4h | 8h | 12h)

Specifies how often (in minutes or hours) that the group (broadcast) key is changed for 802.1X
and WPA.

add wireless ip-qos profile

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

add wireless ip-qos profile

<name>

Adds the specified profile to the list of IP QoS profiles in effect for all local mesh links.

<profile-name>

Name of an existing IP QoS profile.

delete wireless ip-qos profile all

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

delete wireless ip-qos profile all

Clears the list of IP QoS profiles currently in effect for all local mesh links.

delete wireless ip-qos profile

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

delete wireless ip-qos profile

<name>

Removes the specified profile from the list of IP QoS profiles in effect for all local mesh links.

<profile-name>

Name of an existing IP QoS profile currently in the profile list for all local
mesh links.

wireless link qos

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

wireless link qos (disabled | 802.1p | wme | very-high | high | normal | low |
tos | diffsrv)

Sets the local mesh QoS policy.

sensor discovery mode

Supported on: MSM320 MSM335

sensor discovery mode (id | ip)

Sets the method the AP will use to communicate with the RF Manager Server.

Parameters

Connect using the Server ID of the RF Manager Server.

Connect using the IP address or hostname of the RF Manager Server.

Description

For these methods to work, the following must be true:

Summary of Contents for ProCurve MSM317





























































































































Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands

HP ProCurve MSM317, Reference Manual

Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands