HP ProCurve MSM317 Reference Manual Download Page 114

Page: 114 / 124

CLI commands

Syslog context

2-84

Syslog context

Path:

View > Enable > Config > Syslog

Use this context to define syslog settings.

active

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

active

Enables logging to the current destination.

no active

Disables logging to the current destination.

logging facility

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

Sets the facility that is used when logging messages to a syslog server.

Parameters

<facility>

Available facilities are: local0 - local7.

logging host

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

logging host (tcp | udp)

<addr>

[

<number>

]

Sets the remote address, the connection protocol and port of current syslog remote destination.

logging prefix

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

logging prefix

<string>

Sets the prefix that will be prepended to all syslog messages.

no logging prefix

Removes the prefix that is prepended to all syslog messages.

name

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

name

<name>

Renames the current syslog destination.

Summary of Contents for ProCurve MSM317





























































































































Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands

HP ProCurve MSM317, Reference Manual

Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands