HP ProCurve MSM317 Reference Manual Download Page 115

Page: 115 / 124

CLI commands

Syslog context

2-85

end

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

end

Switches to parent context.

level

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

level

Enables filtering of the log file by severity level.

no level

Disables filtering of the log file by severity level.

level

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

Defines the severity of messages that will be logged.

no level

Disables filtering of the log file by severity level.

Parameters

debug

Debug-level messages.

info

Informational messages.

notice

Normal, but significant condition.

warning

Warning conditions.

error

Error conditions.

critical

Critical conditions.

alert

Action must be taken immediately.

emergency

System is unusable.

matches

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

matches (any | all) filters

All three log file filters (message, process, and level) are combined to filter the log according to

this setting.

message

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

message

Enables filtering of the log file message field.

Summary of Contents for ProCurve MSM317





























































































































Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands

HP ProCurve MSM317, Reference Manual

Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands