HP ProCurve MSM317 Reference Manual Download Page 70

Page: 70 / 124

CLI commands

Config context

2-40

New

lldp local-mesh

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

lldp local-mesh

Enable LLDP support on local mesh links.

no lldp local-mesh

Disable LLDP support on local mesh links.

discovery protocol

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

discovery protocol

Enables broadcast of HP device information for interoperability with CDP-enabled networking
hardware.

no discovery protocol

Disable broadcast of HP device information.

discovery protocol device-id

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

discovery protocol device-id

<name>

Overwrite the device-id field of information packets (the AP serial number is not used).

no discovery protocol device-id

Do not overwrite the device-id field of information packets (use the AP serial number).

New

service controller discovery interface internet-port

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

service controller discovery interface internet-port

Allow discovery on the LAN port.

no service controller discovery interface internet-port

Allow discovery on the LAN port.

New

service controller discovery interface lan-port

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

service controller discovery interface lan-port

Allow discovery on the LAN port.

no service controller discovery interface lan-port

Allow discovery on the LAN port.

Summary of Contents for ProCurve MSM317





























































































































Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands

HP ProCurve MSM317, Reference Manual

Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands