HP ProCurve MSM317 Reference Manual Download Page 50

Page: 50 / 124

CLI commands

Config context

2-20

snmp-server trap config-update

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

snmp-server trap config-update

Send a trap whenever the firmware is updated.

no snmp-server trap config-update

Do not send this trap.

logging destination

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

logging destination

<name>

Creates a new remote destination for syslog.

no logging destination

<name>

Deletes the specified syslog destination.

Parameters

<name>

Name of syslog destination. Use the name "local" to edit your local log file
settings. Any other name will edit/create a remote log destination.

snmp-server trap syslog-severity

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

snmp-server trap syslog-severity

Set the severity level of syslog messages that will trigger a trap.

no snmp-server trap syslog-severity

Do not send this trap.

snmp-server

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

snmp-server

Enables the SNMP agent.

no snmp-server

Disables the SNMP agent.

snmp-server access port-1

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335

snmp-server access port-1

Enables SNMP access on the downstream port.

no snmp-server access port-1

Blocks SNMP access on the downstream port.

Summary of Contents for ProCurve MSM317





























































































































Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands

HP ProCurve MSM317, Reference Manual

Search results

Summary of Contents for ProCurve MSM317

Reviews:

Related manuals for ProCurve MSM317

Brands by name

Popular brands