HP OmniBook XE2-DB - Notebook PC, Evaluator Manual

Page: 47 / 106

Using Windows 98
Installing Retail Windows 98
4-7
22. Enter
\OMNIBOOK\DRIVERS\W98\1ST_EDN.W98\NETSHOW\MPFULL
and click OK.
23. Click Yes to install the Windows Media Player.
24. Click Yes to accept the license agreement.
25. Select the connection rate you normally use and click OK.
26. Click OK to finish the installation.
To install PC Card support for retail Windows 98
If you’ve installed a retail version of Windows 98, you’ll need to install PC
Card support. This driver is located on the OmniBook’s hard drive or on the
Recovery CD in \OMNIBOOK\DRIVERS\1ST_EDN.W98\PCCARD
1. From Control Panel, double-click the System icon.
2. Select the Device Manager tab.
3. Select each "Generic Cardbus Controller" under the "PCMCIA socket"
category and click Remove.
4. Close the System Properties window and open a DOS window.
5. Go to the \OMNIBOOK\DRIVERS\W98\1ST_EDN.W98\PCCARD
directory on the Recovery CD and run PCCARDQ.EXE. If D: is the drive
letter of your CD-ROM drive, type:
D:
CD \OMNIBOOK\DRIVERS\W98\1ST_EDN.W98\PCCARD
PCCARDQ.EXE
6. Copy an updated PCMCIA configuration to the Windows system by typing
CD W98ONLY
COPY PCMCIA.INF C:\WINDOWS\INF /Y
COPY PCMCIA.INF C:\WINDOWS\OPTIONS\CABS /Y
7. Shutdown and restart the OmniBook. Win98 will start the Hardware
Wizard.
8. Click Next at the "Add New Hardware Wizard".
9. Click Next to "Search for the best driver for your device."
10. If asked to specify a location, enter the location given in Step 5.
11. Click Next. Windows will detect the CardBus Controller.
12. Click Next. Windows will start the PC Card Wizard.
13. Click Next, Next, Finish to complete the wizard.
14. Click Yes to keep the existing PCCard.vxd.
15. Click Finish. Windows will detect the other CardBus controller.
16. Click Next at the "Add New Hardware Wizard".