HP OmniBook XE2-DB - Notebook PC, Evaluator Manual

Page: 69 / 106

Using Windows 2000
Using Windows 2000
6-5
To install audio support
If you have installed retail Windows you need to install the audio drivers. The
audio drivers are contained in the \OMNIBOOK\DRIVERS\W2K\AUDIO
subdirectory.
1. Run SETUP.EXE from the \OMNIBOOK\DRIVERS\W2K\AUDIO
directory.
2. Follow the instructions on the screen to install the drivers.
The drivers will be installed after the system reboots.
To install pointing device support
If you’ve installed a retail version of Windows 2000, you can install pointing
device support.
The integrated pointing device is fully supported by the Synaptics Touchpad
driver. With the standard PS/2 mouse driver the integrated pointing device will
function, but will be without most special features.
The touchpad files are located on the Recovery CD under
\OMNIBOOK\DRIVERS\W2K\Touchpad.
1. Double-click SETUP.EXE in the Touchpad directory.
2. Follow the instructions on the screen.
3. Click Yes to overwrite existing readme files.
4. Restart your computer.
For more detailed information about the touchpad drivers, see the readme.txt
file in the touchpad directory.
To install the Hewlett-Packard Configuration Interface (HPCI)
If you’ve installed a retail version of Windows 2000, you’ll need to install the
Hewlett-Packard Configuration Interface (HPCI) driver. This driver is located
on the Recovery CD in \OMNIBOOK\DRIVERS\W2K\HPCI.
The HP Configuration Interface device implements the following features:
•
Auto standby on undock based on the bios settings.
•
Fn+F12 hibernate hot key.
•
Volume implemented through the operating system which will actively
be reflected in the user interface.