manualshive.com logo in svg

HP OMNIBOOK 5700, Evaluator Manual

Share
Download
HP OMNIBOOK 5700 Evaluator Manual Download Page 88

Using Windows NT 4.0

Installing Windows NT 4.0

5-8

To install mobile enhancements

The OmniBook’s enhancement package adds the following capabilities to Windows
NT 4.0:

 • 

Advanced Power Management (APM).

 • 

Plug and Play for PC cards.

 • 

The following applications:

  

SystemSoft CardWizard for Windows NT 4.0.

  

SystemSoft PowerProfiler for Windows NT 4.0.

Requirements

♦ 

OmniBook 2000/5700 with Windows NT 4.0 installed.

♦ 

Windows NT 4.0 OmniBook Mobile Enhancements.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\NT\PNP_APM.40.

Important

Please read the online documentation for CardWizard and PowerProfiler before
installing the software. The online documentation is located in the following
directory: C:\OMNIBOOK\DRIVERS\NT\PNP_APM.40\DOC. You must uninstall
SystemSoft CardWizard before installing a Windows NT Service Pack.

Summary of Contents for OMNIBOOK 5700
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands