manualshive.com logo in svg

HP OMNIBOOK 5700, Evaluator Manual

Share
Download
HP OMNIBOOK 5700 Evaluator Manual Download Page 100

6-2

Using OS/2 Warp 4.0

The following procedure installs a retail version of OS/2 Warp 4.0 and configures
appropriate device drivers.

Requirements

♦ 

OS/2 Warp 4.0 Installation CD and the three installation boot disks.

♦ 

16 MB of RAM.

♦ 

Hard drive with 80-120 MB of free space.

♦ 

OmniBook 2000/5700 CD-ROM, a SCSI CD-ROM drive attached to the
OmniBook Docking Station, or a networked CD-ROM.

Note

If you are using a SCSI CD-ROM, copy
C:\OMNIBOOK\DRIVERS\OS2\SCSI\AMSIO2.ADD to the OS/2 Disk 1. Add the
following statement to CONFIG.SYS file on the OS/2 Disk 1: BASEDEV=AMSIO2.ADD
You may have to make room on the OS/2 Disk 1. You can safely remove
AHA152X.ADD which is the driver for the ADAPTEC 1510,1520 and 1522 SCSI cards.

♦ 

HP OmniBook drivers for video and sound. If you will be using an OmniBook
Docking Station, you will also need the drivers for SCSI.
Location: OmniBook hard drive or Recovery CD in
\OMNIOBOOK\DRIVERS\OS2.

Summary of Contents for OMNIBOOK 5700
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands