HP NetStorage 6000, User Manual

Page: 29 / 192

Configuring Your System and Network
Network Settings
3-6
Windows Settings
If you support Windows users, you must specify the Windows settings
during initial setup.
To specify the Windows settings:
1 Using the NetStorage web interface, click the Configuration tab, then
select Network Settings > Windows Settings.
2 Enter the:
•
Primary and Secondary WINS IP Addresses
•
Network Neighborhood System Comment (optional)
3
Click either User Level Security or Share Level Security for the
security mode. See “User-Level Security” on page 8-6 or “Share-Level
Security” on page 8-5 for more information.
a
If you select User Level Security, enter the:
— Domain Name
— Domain Login Name (the login name specified must have
sufficient permission to allow machines to be added to the
domain)
— Domain Password
b If you select Share Level Security, enter the name of the
Workgroup where the HP NetStorage 6000 is a member.
4
Click Apply. You do not need to restart the system unless you changed
your security mode.