HP NetStorage 6000 User Manual Download Page 160

Page: 160 / 192

System Specifications
Environmental Specifications

C-9

Vibration - Survival

•

Swept Sine (5-500 Hz, 0.5g (0 to
Peak), sweep rate 1 oct/min, 5
minute dwell at 4 resonances - per
axis while product is powered up)

•

Random (5-500 Hz, ~2.41 G

rms

, 5-

100 Hz @ 0.015 g*/Hz, 100-137 Hz
@ -6 dB/oct slope, 137-350 Hz @
0.0107 g* /Hz, 6 dB/oct slope, 500
Hz @ 0.0052 g*/Hz, 10 minutes
each axis (min.) while product is
powered up)

Shock (End Use Handling)

Less than 45.5 kg: Shock Machine
Test, Half sine waveform, <3 millisec
duration, velocity change equals:
delta Velocity = 171-0.69m for
9.1<m<45.4kg

Shock (Transportation)

Shock machine test with trapezoidal
waveform and velocity change per
table below:

Type 1: Single or multiple products,
boxed, non-paletized, which may be
shipped as a single unit to the end
user.

Type 2: Single product, palletized and
prepared for shipment such that it’s
orientation is intended to be
controlled.

Type 3: Multiple products, unitized
and palletized, which are shipped only
as a palletized load to the end user.

Package Test (Vibration)

And

Package Test (Impact)

Acoustics

5.0 Bels (sound power as calculated
from the sound pressure
measurements power ISO Standards
requirements)

System Dimensions

Desktop: 8 ¾" H x 19" W x 22" D
Rack: 5U (8 ¾") H x 19" W x 22" D

System Weight

38-42 kg (85 - 93 lbs)

Specification

Description

Summary of Contents for NetStorage 6000

































































































































































































Search results

Summary of Contents for NetStorage 6000

Reviews:

Related manuals for NetStorage 6000

Brands by name

Popular brands

HP NetStorage 6000, User Manual

Search results

Summary of Contents for NetStorage 6000

Reviews:

Related manuals for NetStorage 6000

Brands by name

Popular brands