HP NetStorage 6000 User Manual Download Page 120

Page: 120 / 192

Integrating with Management Applications
HP Top Tools Integration

10-3

HP Top Tools Integration

Note

The integration pack must be installed on the machine running HP
TopTools.

To install HP Top Tools:

Close all HP TopTools program pages.

From the Control Panel, select Services.

Stop the HP TopTools Services. If this fails, set the startup mode to
Manual, reboot and go to step b.

Stop the IIS Admin Service. Click OK on the dialog box that lists the
WWW Publishing Services.

Insert the HP NetStorage 6000 CD into your CD-ROM drive.

Run the following program and follow the screen instructions.

\TopTools\WinNT\setup.exe

From the Control Panel, select Services.

Restart WWW Services.

Restart HP TopTools Services.

Open the HP TopTools main page.

•

If prior to running the integration pack, TopTools has already detected
the HP NetStorage 6000 device:

Locate the HP NetStorage 6000 device. They will be listed by the
name you have specified.

Right-click on the device.

In the pop-up menu, select Update Discovery.

•

If TopTools has not already detected the device, run Discovery from
HP TopTools by selecting Settings > Discovery user interface.

To uninstall the integration pack:

The integration pack cannot be removed.

Summary of Contents for NetStorage 6000

































































































































































































Search results

Summary of Contents for NetStorage 6000

Reviews:

Related manuals for NetStorage 6000

Brands by name

Popular brands

HP NetStorage 6000, User Manual

Search results

Summary of Contents for NetStorage 6000

Reviews:

Related manuals for NetStorage 6000

Brands by name

Popular brands