HP NetServer AA 4000, Installation Manual

Page: 68 / 82

3-30 HP Netserver AA Solution Installation Guide
Continue with Adjusting the CE and IOP Event Log Settings .
3 On the CE, install the Endurance Virtual
Network Redirector using the Add New
Hardware Wizard.
a. Using the Control Panel, start the Add/
Remove Hardware Wizard.
b. Click Add/Troubleshoot a device .
c. Click Add a new device .
d. Select No, I want to select hardware from
a list .
e. Select Network Adapters , then Have Disk .
f. On the CE boot drive, browse to
drive \ folder \system32\drivers
\MtcPnP\netmtcvnr.inf.
g. Select Endurance Virtual Network
Redirector ( MtcVnR ).
h. Ignore the warning Digital Signature Not
Found , and continue with the installation.
The installation of the Virtual Network
Redirector completes.
You must install the Endurance Virtual
Network Redirector
twice to create two
virtual network adapters: the first to
connect IOP1, and the second to
connect IOP2.
drive \ folder is the drive and directory
where you installed the CE copy of
Windows. (You can find this in the
%SystemRoot%
environment variable.
For example,
C:\WINNT
.)
If using the TCP/IP protocol, you must
specify the IP addresses because there
is no DHCP server on the Virtual
Network.
4 Repeat step 3 to install a second Endurance
Virtual Network Redirector for IOP2.
Step Action Notes