HP NetServer AA 4000 Installation Manual Download Page 66

Page: 66 / 82

3-28

HP Netserver AA Solution Installation Guide

Completing Software Installation on the CEs

Note:

You do

not

install CE software on the second CE. The IOPs update the disks via

a mirror copy.

After the Windows Unattended Installation completes, the CE reboots, and video is redirected
to the CE Desktop application on the IOP.

To view CE video output, you must ensure that

the CE Desktop application is running on the IOPs.

At this time, you will complete steps that could not be performed during the Unattended
Installation:

•

Installing the Appropriate Service Pack on the CE

•

Installing Networking Software on the CE

Installing the Appropriate Service Pack on the CE

Install one of the currently supported Windows Service Packs and any applicable Microsoft
hotfixes on the CE.

Note:

Perform this step if you did not slip stream the Windows installation.

For a complete list of supported Service Packs, refer to the

Endurance Release Notes

Continue with

Installing Networking Software on the CE

Summary of Contents for NetServer AA 4000



















































































Search results

Summary of Contents for NetServer AA 4000

Reviews:

Related manuals for NetServer AA 4000

Brands by name

Popular brands

HP NetServer AA 4000, Installation Manual

Search results

Summary of Contents for NetServer AA 4000

Reviews:

Related manuals for NetServer AA 4000

Brands by name

Popular brands