manualshive.com logo in svg

HP Neoview Messages, Manual

Share
Download
HP Neoview Messages Manual Download Page 84

Recovery

This is an informational message. To prevent this warning, turn off query caching

before query preparation.

SQL 2109

2109 Invalid Character error converting SQL statement from character

set from character set to character set to character set.

from character set

may be any of the supported character sets. One of the “from” or
“to” character set is always UCS2.

to character set

may be any of the supported character sets. One of the “from” or
“to” character set is always UCS2.

Cause

The character translation routines failed in the translation between character sets. The

most common problem is the supplied character string is not encoded in the character set
requested.

Effect

The operation fails.

Recovery

Specify a different character set for either the input character string or the output

character string.

SQL 2110

2110 Buffer Overrun error converting SQL statement from character set

from character set to character set to character set.

from character set

may be any of the supported character sets. One of the “from” or
“to” character set is always UCS2.

to character set

may be any of the supported character sets. One of the “from” or
“to” character set is always UCS2.

Cause

Not enough space was allocated to translate between the character sets.

Effect

The operation fails.

Recovery

Contact your HP service provider about this problem.

SQL 2200

2200 DEFAULTS attribute attribute is read-only.

attribute

is the DEFAULTS attribute.

Cause

You attempted to change the DEFAULTS

attribute

, which is read-only.

Effect

The operation fails.

Recovery

None.

SQL 2201

2201 SQL compilation return code is mxcmp non-zero exit code.

Cause

You invoked mxCompileUserModule on an application file that has an embedded

module definition. An SQL compilation of an embedded module definition resulted in an HP
Neoview compiler nonzero exit code, indicating a warning or error.

Effect

The operation fails.

Recovery

Review the Neoview compiler warning or error message. Trace the diagnostic back

to the module source file and correct the offending source statement. Retry preprocessing,
translating, compiling, and SQL compiling the application file.

SQL 2202

2202 Application file is not an application (ELF or SQL) file.

84

Neoview Compiler Messages (2000 Through 2999)

Summary of Contents for Neoview Messages

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands