HP Neoview Messages Manual Download Page 379

Page: 379 / 400

20 Rowsets Messages (30000 Through 30999)

SQL 30002

30002 The given rowset size (num1) must be smaller or equal to the

smallest dimension (num2) of the arrays composing the rowset.

num1

is the size of the rowset.

num2

is the smallest dimension of the rowset arrays.

Cause

You specified a rowset size larger than the smallest dimension,

num2

, of the rowset

arrays.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 30003

30003 Rowset size must be an integer host variable or constant.

Cause

You specified a rowset size with a value other than an integer host variable or constant.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 30004

30004 The dimension of the arrays composing the rowset must be greater

than zero. A value of num was given.

num

is the rowset size.

Cause

You specified a value for rowset arrays that is invalid. It must be greater than 0 (zero).

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 30006

30006 Both rowset and scalar host variables occur in the output list.

Either all output host variables must be scalar or all output host

variables must be rowsets.

Cause

Stated in the message.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 30008

30008 Rowset index is out of range.

Cause

The HP Neoview database software received an internal error from a rowset.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

379

Summary of Contents for Neoview Messages

















































































































































































































































































































































































































Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands

HP Neoview Messages, Manual

Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands