HP Neoview Messages Manual Download Page 221

Page: 221 / 400

name

is the table, index, or materialized view where the Reorg operation fails.

reason

is why the operation fails.

Cause

The reorganization failed because of the reported

reason

Effect

The operation fails.

Recovery

To determine the cause of the problem, look in the EMS log for other messages

that report additional errors and unavailable resources. Consider searching the log for the
keyword

reorg

to find other errors that report problems. Fix the problem or wait until the

resources are available, and retry the Reorg operation.

SQL 8912

8912 The request to allocate a stored procedure result set failed. An

unexpected internal error was encountered.

Cause

An internal error was detected within the HP Neoview SQL executor during allocation

of a stored procedure result set.

Effect

The operation fails.

Recovery

None. Contact the GMCSC and report this condition.

SQL 8913

8913 The PREPARE operation is not allowed on a stored procedure result

set.

Cause

A command-line interface (CLI) application attempted to dynamically prepare an

SQL statement, and the statement identifier is associated with a stored procedure result set.

Effect

The operation fails.

Recovery

None. Contact the GMCSC and report this condition.

SQL 8914

8914 An attempt to open a stored procedure result set at position index

failed because multiple open attempts on the same result set are not

allowed.

index

is an integer specifying a position in the ordered set of result sets returned from a
CALL statement.

Cause

A call-level interface (CLI) application attempted to open a stored procedure result

set cursor that had been previously opened.

Effect

The operation fails.

Recovery

None. Contact the GMCSC and report this condition.

SQL 8915

8915 An attempt to access a stored procedure result set at position

index failed because there is no result set currently available at that

position.

index

is an integer specifying a position in the ordered set of result sets returned from a
CALL statement.

Cause

A call-level interface (CLI) application attempted to access a stored procedure result

set at position index, but the number of result sets returned from the CALL statement was less
than index.

Effect

The operation fails.

Recovery

None. Contact the GMCSC and report this condition.

221

Summary of Contents for Neoview Messages

















































































































































































































































































































































































































Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands

HP Neoview Messages, Manual

Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands