manualshive.com logo in svg

HP Neoview Messages, Manual

Share
Download
HP Neoview Messages Manual Download Page 160

Cause

You attempted to run a compound statement that contains an embedded INSERT

statement.

Effect

The operation fails.

Recovery

Modify the statement and resubmit.

SQL 4202

4202 SEQUENCE BY is not supported for embedded name expressions.

Cause

You attempted to perform an embedded expression that included SEQUENCE BY.

Effect

The HP Neoview database software is unable to compile the statement.

Recovery

Modify the statement and resubmit.

SQL 4203

4203 Insert/Update/Delete operation on non-audited table name requires

index maintenance which may cause the index(es) to become corrupt.

Cause

You attempted to perform an INSERT, UPDATE, or DELETE operation on a nonaudited

table and IUD_NONAUDITED_INDEX_MAINT is set to WARN. This message appears as an
warning.

Effect

The Neoview database software performs the INSERT, UPDATE, or DELETE operation.

If the operation encounters an error, you will see other messages about that condition.

Recovery

Informational message only; no corrective action is needed.

SQL 4204

4204 Stream access is supported for only key-sequenced tables. Table:

name.

Cause

You attempted to use stream access on a table that is not key-sequenced, which is

required.

Effect

The HP Neoview database software is unable to compile the statement.

Recovery

Modify the statement and resubmit.

SQL 4205

4205 Embedded name1 is supported for only key-sequenced tables. Table:

name2.

Cause

You attempted to perform an embedded action that is supported only for

key-sequenced tables.

Effect

The HP Neoview database software is unable to compile the statement.

Recovery

Modify the statement and resubmit.

SQL 4206

4206 Embedded name is supported only for updatable views. View: name2.

Cause

You attempted to perform an embedded action that is supported only for updatable

views.

Effect

The HP Neoview database software is unable to compile the statement.

Recovery

Modify the statement and resubmit.

SQL 4207

4207 Index name and other indexes covering a subset of columns do not

cover all output values of stream.

160

Binder and Compilation Messages (4000 Through 4999)

Summary of Contents for Neoview Messages

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands