HP Neoview Messages Manual Download Page 82

Page: 82 / 400

SQL 2098

2098 The compilation type compilation completed with value warnings.

Cause

compilation type

completed with the number of warnings given as

value.

Effect

None.

Recovery

Informational message only; no corrective action is needed.

SQL 2099

2099 The compilation type compilation failed with value errors and value

warnings.

Cause

compilation type

failed with the number of errors and warnings given as

value

Effect

Any statement with an error is not compiled.

Recovery

If this is a warning, this is an informational message. Otherwise, correct the syntax

and resubmit.

SQL 2100

2100 Break was received. The compilation has been aborted.

Cause

The HP Neoview database software received a break and aborted the compilation.

Effect

The Neoview database software does not continue compilation.

Recovery

Informational message only; no corrective action is needed.

SQL 2101

2101 Compilation failure due to internal error.

Cause

A compilation failed with an internal error.

Effect

The HP Neoview database software is unable to process this query.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 2102

2102 This query could not be compiled with 'MINIMUM' optimization level.

Suggestion: Retry with 'MEDIUM' optimization level.

Cause

The HP Neoview database software was unable to compile this query using the

MINIMUM optimization level.

Effect

The Neoview database software is unable to process this query.

Recovery

Resubmit the query with MEDIUM optimization level. Precede the statement with:

CONTROL QUERY DEFAULT OPTIMIZATION-LEVEL 'MEDIUM';

SQL 2103

2103 This query could not be compiled for one/both of the following

reasons: a) Use of 'MINIMUM' optimization level, or b) incompatible

Control Query Shape specifications.

Cause

The HP Neoview database software was unable to compile this query, either because

it was not able to use the MINIMUM optimization level or because you used an incompatible
CONTROL QUERY SHAPE specification.

Effect

The Neoview database software is unable to process this query.

Recovery

If applicable, resubmit the query with MINIMUM optimization level. Precede the

statement with:

Neoview Compiler Messages (2000 Through 2999)

Summary of Contents for Neoview Messages

















































































































































































































































































































































































































Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands

HP Neoview Messages, Manual

Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands