HP Neoview Messages, Manual

Page: 187 / 400

SQL 8014
8014 A SELECT statement within compound statement did not return any
row.
Cause
You specified a SELECT statement inside a compound statement that did not return
any rows.
Effect
None.
Recovery
Do not attempt recovery. HP support will perform recovery operations in response
to an automatically generated dial-out message about this condition.
SQL 8015
8015 Aborting transaction because a compound statement performed an
update operation followed by a SELECT statement that did not return any
row.
Cause
You performed an UPDATE, DELETE, or INSERT operation as part of a compound
statement before a SELECT statement. The SELECT statement did not return any rows.
Effect The transaction is aborted, and the update is rolled back.
Recovery
Do not attempt recovery. HP support will perform recovery operations in response
to an automatically generated dial-out message about this condition.
SQL 8016
8016 An attempt was made to access name which has a system version that
is incompatible with the version of the accessing software.
Cause You attempted to access a system version that is incompatible with the version of the
accessing software.
Effect
The operation fails.
Recovery
The system you are trying to access must be on a system version that is compatible
with your accessing software. Upgrade that system.
SQL 8017
8017 Explain information is not available for this query.
Cause
The explain default has been turned off for this query.
Effect
The HP Neoview database software is not able to display explain information.
Recovery
Turn the explain default on for this query.
SQL 8023
8023 The query has been terminated because it exceeded its CPU time
limit of n1 seconds in fragment n2.
n1 is the time limit of the processor in seconds.
n2 is the fragment number where the problem was detected.
Cause The CPU time accumulated in an SQL master or ESP process exceeded the limit
n1
for which the query is configured. This problem was detected while executing fragment
n2
.
Effect
The operation fails.
Recovery
If possible, rewrite the query so that it can complete within the configured limit,
or increase the limit.
SQL 8025
8025 The query has been terminated because it exceeded its CPU time
limit of n1 seconds in pp.
187