HP Neoview Messages Manual Download Page 185

Page: 185 / 400

9 Executor Messages (8000 Through 8999)

SQL 8001

8001 An internal executor error occurred.

Cause

The HP Neoview database software has received an internal error.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 8002

8002 The current nowaited operation is not complete.

Cause

A nowait call-level interface (CLI) operation was started.

Effect

The operation is not complete.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 8003

8003 The descriptor is locked by another nowaited operation.

Cause

The descriptor is still being used by another nowait call-level interface (CLI) operation.

Effect

The new descriptor is locked.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 8004

8004 Trying to open a statement or cursor that is not in the closed

state.

Cause

You attempted to open a statement or cursor that is not in the closed state. It must be

in the closed state to be opened.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 8005

8005 Trying to fetch from a cursor that is not in the open state.

Cause

You attempted to fetch from a cursor that is not open.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 8006

8006 The stream timed out, but the cursor is still open.

Cause

A cursor is still open although its stream timed out.

Effect

The operation fails.

Recovery

Close the cursor before trying to open it.

185

Summary of Contents for Neoview Messages

















































































































































































































































































































































































































Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands

HP Neoview Messages, Manual

Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands