HP Neoview Messages Manual Download Page 389

Page: 389 / 400

File-System Error Text

Error Number

Tape command rejected.

0156

I/O process internal system error.

0157

Request is invalid for device state; protocol error.

0160

Impossible event occurred for line state.

0161

Operation timed out.

0162

EOT received or power at autocall unit is off.

0163

Disconnect received or data line is occupied (busy).

0164

RVI received or data line not occupied after setting call request.

0165

ENQ received or auto call unit failed to set present-next-digit.

0166

EOT received on line bid, or data-set-status not set

0167

NAK received on line bid, or auto-call unit failed to clear present-next-digit after digit-present
was set.

0168

WACK received on line bid, auto-call unit set abandon-call-and-retry, or station disabled or
undefined.

0169

No ID sequence received during circuit assurance mode or invalid message control word entry
number on write.

0170

No response received on bid/poll/select, or reply invalid.

0171

Reply not proper for protocol; invalid control sequence or invalid data.

0172

Maximum allowable NAKs received (transmission error), invalid message control word on WRITE,
or invalid request ID.

0173

WACK received or bus frame aborted.

0174

Incorrect alternating ACK received, or command rejected.

0175

Poll sequence ended with no responder.

0176

Text overrun (insufficient buffer space for data transfer).

0177

No address list specified.

0178

Application buffer is incorrect, control request pending, or autopoll active.

0179

Unknown device status received.

0180

Sub device expected status information but received data instead.

0181

Operation returning with no useful data.

0187

Damage to logical flow of events.

0188

Response not yet available.

0189

Device error; hardware problem.

0190

Device power on, or terminal reset.

0191

Device in diagnose mode; system operator running diagnostics.

0192

Invalid or missing microcode file.

0193

Device use or mount request rejected by operator.

0194

Operation requires use of Tape Services but it is not running; tape operation is not allowed.

0195

A tape label record is missing or incorrect.

0196

An SQL error has occurred.

0197

A DEFINE of the given name could not be found.

0198

The disk file is protected by security software.

0199

The device is owned by an alternate port.

0200

389

Summary of Contents for Neoview Messages

















































































































































































































































































































































































































Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands

HP Neoview Messages, Manual

Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands