HP Neoview Messages Manual Download Page 173

Page: 173 / 400

7 Optimizer Messages (6000 Through 6999)

SQL 6000

6000 Internal error in the query optimizer.

Cause

The optimizer received an internal error during query optimization.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 6001

6001 DISTINCT aggregates can be computed for only one column per table

expression.

Cause

You attempted to compute DISTINCT aggregates for more than one column.

Effect

DISTINCT aggregates can be computed only for one column per table expression.

Recovery

Correct syntax and resubmit.

SQL 6002

6002 The metadata table HISTOGRAMS or HISTOGRAM_INTERVALS contains

invalid values. If you have manually modified the metadata table, then

you should undo your changes using the CLEAR option in UPDATE STATISTICS.

Cause

You have manually modified the metadata table, and now it contains invalid values.

Effect

The HP Neoview database software is unable to complete compilation.

Recovery

Undo your changes using the CLEAR option in UPDATE STATISTICS.

SQL 6003

6003 The metadata table HISTOGRAMS or HISTOGRAM_INTERVALS contains

invalid boundary value value for column name. If you have manually

modified the metadata table, then you should undo your changes using

the CLEAR option in UPDATE STATISTICS and regenerate the statistics.

Cause

You have manually modified the metadata table, and now it contains an invalid

boundary value.

Effect

The HP Neoview database uses default histograms to compile the query. Therefore,

these might not be the best plans generated.

Recovery

Undo your changes by using the CLEAR option in UPDATE STATISTICS and

regenerate the statistics.

SQL 6004

6004 The metadata table HISTOGRAM_INTERVALS for column clumn does not

have intervals intervale_number #1 and interval_number #2 in order. If

you have manually modified the metadata table, then you should undo

your changes using the CLEAR option in UPDATE STATISTICS and regenerate

the statistics.

Cause

You manually modified the metadata table and it now contains an invalid boundary

value.

Effect

The HP Neoview database uses default statistics to generate plans. Therefore, these

might not be the best plans generated.

173

Summary of Contents for Neoview Messages

















































































































































































































































































































































































































Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands

HP Neoview Messages, Manual

Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands