HP Neoview Messages Manual Download Page 226

Page: 226 / 400

Recovery

Correct the syntax and resubmit.

SQL 9204

9204 Invalid option option specified. Value must be range.

Cause

You specified an invalid option for UPDATE STATISTICS. The value

range

specifies

the valid range for this option.

Effect

The HP Neoview database software is unable to continue processing.

Recovery

Correct the syntax and resubmit.

SQL 9205

9205 UPDATE STATISTICS is not supported for object name.

Cause

You attempted to run UPDATE STATISTICS against an object that is not supported.

Effect

The HP Neoview database software is unable to continue processing.

Recovery

Correct the syntax and resubmit.

SQL 9206

9206 You are not authorized to read/write object name. Verify that you

have the necessary access privileges.

Cause

The HP Neoview database software could not perform an UPDATE STATISTICS

statement because you are not authorized to perform this operation against this table. You
must either own the object

name

or be the super ID.

Effect

The HP Neoview database software is unable to continue processing.

Recovery

Resubmit after checking the table location and access privileges.

SQL 9207

9207 The specified SAMPLE option generated an empty sample set. Modify

the SAMPLE option and resubmit.

Cause

The SAMPLE option you specified generated an empty sample set.

Effect

The HP Neoview database software is unable to continue processing.

Recovery

Modify the SAMPLE option and resubmit.

SQL 9208

9208 Column definitions could not be accessed.

Cause

An UPDATE STATISTICS statement was unable to access column definitions.

Effect

The operation fails.

Recovery

Resubmit the statement. If this does not correct the problem, stop and restart the

HP Neoview database software. If this does not correct the problem, report the entire message
to HP support.

SQL 9209

9209 Column name does not exist in object name.

Cause

You tried to access column

name

, which does not exist in object

name

Effect

The operation fails.

Recovery

Check the column

name

and resubmit.

226

UPDATE STATISTICS Messages (9200 Through 9218)

Summary of Contents for Neoview Messages

















































































































































































































































































































































































































Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands

HP Neoview Messages, Manual

Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands